Sheet Metal Brakes

Baileigh's sheet metal brakes are regarded as an industry standard in HVAC and metal fabrication shops throughout North America and parts of Europe. Each sheet metal brake has been articulately designed and constructed to offer value and profit to the fabricator for a reasonable investment that will offer your organization decades of use.

Baileigh offers one of the most extensive lines of bending brakes on the market today. We have metal bending brakes from 24 inches up to 13 feet in length. Capacities range from 22 gauge down to 10 gauge mild steel. We offer standard manual leaf or programmable hydraulic type bending brake machines. Our sheet metal brakes can be broken down into two classifications, straight brakes or box and pan brakes.

Our box and pan brake brakes are all constructed with the best quality steel on the market and designed for years of service. Where needed we use heavy duty truss rods on the lifting apron and upper beam. Depending on the bending brake machine we use springs, counter weights or hydraulics to help lift the apron. Our sheet metal brakes have lubrication points where needed and have hardened fingers and surface areas where needed. Sturdy floor frames are standard.

The manual straight brake and standard box and pan sheet metal Benders clamp the material with the top beam with the finger or die. Then the counter weighted assist helps the operator lift the bottom apron to complete the bend. Stop rods help with repeating the same angles and gap adjustments assist when changing materials and thicknesses.

Besides manual leaf brakes in straight or box and pan style brakes, we also offer a European style foot clamp box and pan brake. This type of bending brake machine is unique because it uses a foot pedal to clamp the fingers down on the piece of sheet metal. Bending is assisted with a spring torsion system. 

Finally we offer a hydraulic metal brake series that is a leaf style machine but has a hydraulic apron. We offer these style machines in 10, 12 and 14 gauges. These metal brake machines can run in a manual or automatic mode. The leaf position is programmable for repeatable bends every time. Our hydraulic sheet metal brake line comes in widths from 4 to 10 feet wide and offer the perfect solution to the fabricator who requires more production in heavier gauges.

A Baileigh sheet metal brake is typically in stock and can ship within 72 hours. If you have further questions about this extensive line of sheet metal brakes, please call one of our sales associates.

Read more about Sheet Metal Brakes

Ascending | Descending
  1. Manually Operated Mini Shear/Brake SB-8

    Manually Operated Mini Shear/Brake SB-8

    $195.00
    Manually Operated Mini Shear/Brake Combination. 18 Gauge Aluminum Maximum Capacity. 20 Gauge Copper/Brass Maximum Capacity. 8" Blade Length More
  2. Shear Brake Roll SBR-1220

    Shear Brake Roll SBR-1220

    $395.00
    Manually Operated, 3 in 1 Combination Shear Brake and Roll. 12" Bed Width, 20 Gauge Mild steel Capacity on All Operations. 90 Degree Maximum Bend Angle, 1-1/2" Minimum Roll Diameter. Includes Back Gauge and Wire Grooves More
  3. Sheet Metal Brake Bb2416E

    Metal Bending Box Brake BB-2416E

    $595.00
    Manually Operated Box and Pan (Finger) Brake, 2' Length, 16 Gauge Mild Steel Capacity, Includes Stand More
  4. Hbr4820 Straight Brake

    Straight Hand Brake - HBR-4820

    $695.00
    48" 20 Gauge Straight (Racers) Brake More
  5. 3 in 1 Combination Machine SBR-3020

    3 in 1 Combination Machine SBR-3020

    $695.00
    Manually Operated, 3 in 1 Combination Shear Brake and Roll. 30" Bed Width, 20 Gauge Mild steel Capacity on All Operations. 90 Degree Maximum Bend Angle, 1-1/2" Minimum Roll Diameter. Includes Back Gauge and Wire Grooves More
  6. Sheet Metal Brake Bb3616E

    Finger Brake BB-3616E

    $795.00
    Manually Operated Box and Pan (Finger) Brake, 3' Length, 16 Gauge Mild Steel Capacity, Includes Stand. More
  7. Hand Brake HBR-7222

    Hand Brake HBR-7222

    $895.00
    72" 22 Gauge Straight (Racers) Brake More
  8. Sheet Metal Brake HB-4816E

    Sheet Metal Brake HB-4816E

    $995.00
    Manually Operated Hand (Straight) Brake, 4' Length,16 Gauge Mild Steel Capacity, Includes Stand More
  9. 3-in-1 Shear Brake Roll Machine SBR-4020

    3-in-1 Shear Brake Roll Machine SBR-4020

    $995.00
    Manually Operated, 3 in 1 Combination Shear Brake and Roll. 40" Bed Width, 20 Gauge Mild steel Capacity on All Operations. 90 Degree Maximum Bend Angle, 1-3/4" Minimum Roll Diameter. Includes Back Gauge and Wire Grooves More
  10. Sheet Metal Brake Bb4816E

    Sheet Metal Brake BB-4816E

    $1,195.00
    Manually Operated Box and Pan (Finger) Brake, 4' Length, 16 Gauge Mild Steel Capacity, Includes Stand More
  11. Sheet Metal Brake HB-4816

    Sheet Metal Brake HB-4816

    $1,695.00
    Manually Operated Hand (Straight) Brake, 4' Length,16 Gauge Mild Steel Capacity, Includes Stand More
  12. Shear Brake and Roll SBR-5220

    Shear Brake and Roll SBR-5220

    $1,695.00
    Manually Operated, 3 in 1 Combination Shear Brake and Roll. 52" Bed Width, 20 Gauge Mild steel Capacity on All Operations. 90 Degree Maximum Bend Angle, 1-3/4" Minimum Roll Diameter. Includes Back Gauge and Wire Grooves More
  13. Sheet Metal Brake Bb4816

    Heavy Duty Box and Pan Brake BB-4816

    $1,895.00
    Manually Operated Box and Pan (Finger) Brake, 4' Length, 16 Gauge Mild Steel Capacity, Includes Stand More
  14. Finger Brake Bb4012F

    Sheet Metal Finger Brake BB-4012F

    $1,895.00
    Manually Operated Box and Pan (Finger) Brake, 40" Length, 12 Gauge Mild Steel Capacity, Includes Stand and Foot Pedal Material Clamping More
  15. Finger Brake Bb5012F

    Finger Brake BB-5014F

    $2,095.00
    Manually Operated Box and Pan (Finger) Brake, 50" Length, 14 Gauge Mild Steel Capacity, Includes Stand and Foot Pedal Material Clamping More
  16. Shear Brake Roll SBR-5216

    Shear Brake Roll SBR-5216

    $2,295.00
    Manually Operated, 3 in 1 Combination Shear Brake and Roll. 52" Bed Width, 16 Gauge Mild steel Capacity on All Operations. 90 Degree Maximum Bend Angle, 1-3/4" Minimum Roll Diameter. Includes Back Gauge and Wire Grooves More
  17. Magnetic Brake Bb4816M

    Magnetic Sheet Metal Brake BB-4816M

    $2,295.00
    220V Single Phase Manually Operated Magnetic Sheet Metal Brake More
  18. Sheet Metal Brake Bb4814

    Box Brake BB-4814

    $2,395.00
    Manually Operated Box and Pan (Finger) Brake, 4' Length, 14 Gauge Mild Steel Capacity, Includes 11 Fingers, 6-3", 2-4", 1-25" More
  19. Sheet Metal Brake HB-9616

    Sheet Metal Brake HB-9616

    $5,895.00
    96" 16 Gauge Hand (Straight) Brake More
  20. Finger Brake BB-4812

    Finger Brake BB-4812

    $6,095.00
    Heavy Duty Manually Operated Box and Pan (Finger) Brake, 4' Length, 12 Gauge Mild Steel Capacity, Includes 11 Fingers, 3-3", 2-4", 5-5",1-6" More
  21. Sheet Metal Leaf Brake HB-9612

    Sheet Metal Leaf Brake HB-9612

    $6,695.00
    Heavy Duty Manually Operated Hand (Straight) Brake, 8' Length, 12 Gauge Mild Steel Capacity More
  22. Bb7216M

    Magnetic Box and Pan Brake BB-7216M

    $6,695.00
    220V Single Phase Manually Operated Magnetic Sheet Metal Brake, 6' Length, Includes Foot Pedal More
  23. Straight Brake HB-12016

    Straight Brake HB-12016

    $7,195.00
    Heavy Duty Manually Operated Hand (Straight) Brake, 10' Length, 16 Gauge Mild Steel Capacity More
  24. Magnetic Sheet Metal Brake BB-9616M

    Magnetic Sheet Metal Brake BB-9616M

    $7,695.00
    220V Single Phase Manually Operated Magnetic Sheet Metal Brake, 8' Length, Includes Foot Pedal More
  25. Straight Sheet Metal Brake HB-12014

    Straight Sheet Metal Brake HB-12014

    $7,695.00
    Heavy Duty Manually Operated Hand (Straight) Brake, 10' Length, 14 Gauge Mild Steel Capacity More
  26. Sheet Metal Brake Bb7212

    Manually Operated Box and Pan (Finger) Brake BB-7212

    $7,695.00
    Heavy Duty Manually Operated Box and Pan (Finger) Brake, 6' Length, 12 Gauge Mild Steel Capacity, Includes 17 Fingers, 6-3", 3-4", 6-5",2-6" More
  27. Box and Pan Brake BB-9612

    Box and Pan Brake BB-9612

    $8,795.00
    Heavy Duty Manually Operated Box and Pan (Finger) Brake, 8' Length, 12 Gauge Mild Steel Capacity, Includes 22 Fingers, 6-3", 4-4",10-5", 2-6" More
  28. Hand Brake HB-14418

    Hand Brake HB-14418

    $9,495.00
    Heavy Duty Manually Operated Hand (Straight) Brake, 12' Length, 18 Gauge Mild Steel Capacity More
  29. Box and Pan Brake BB-12016

    Box and Pan Brake BB-12016

    $9,595.00
    Heavy Duty Manually Operated Box and Pan (Finger) Brake, 10' Length, 16 Gauge Mild Steel Capacity, Includes 26 Fingers, 6-3", 4-4",10-5", 6-6" More
  30. Sheet Metal Bender HB-15722

    Sheet Metal Bender HB-15722

    Regular Price: $11,495.00

    Sale Price: $9,770.75

    Heavy Duty Manually Operated Hand (Straight) Brake, 13' Length, 22 Gauge Mild Steel Capacity More
  31. Sheet Metal Brake BB-12014

    Sheet Metal Brake BB-12014

    $10,295.00
    Heavy Duty Manually Operated Box and Pan (Finger) Brake, 10' Length, 14 Gauge Mild Steel Capacity, Includes 26 Fingers, 6-3", 4-4", 10-5", 6-6" More
  32. Box And Pan Brake Bb14418

    Box and Pan Brake BB-14418

    $12,395.00
    Heavy Duty Manually Operated Box and Pan (Finger) Brake, 12' Length, 18 Gauge Mild Steel Capacity, Includes 31 Fingers, 6-3", 6-4", 10-5", 9-6" More
  33. Finger Brake BB-15722

    Finger Brake BB-15722

    $14,195.00
    Heavy Duty Manually Operated Box and Pan (Finger) Brake, 13' Length, 22 Gauge Mild Steel Capacity, Includes 33 Fingers, 6-3", 6-4", 10-5", 11-6" More
  34. Hydraulic Box and Pan Finger Brake BB-4810H

    Hydraulic Box and Pan Finger Brake BB-4810H

    $19,195.00
    220 Volt Three Phase Heavy Duty Hydraulic Box and Pan (Finger) Brake, 4' Length, 10 Gauge Mild Steel Capacity, Includes 11 Fingers, 3-3", 2-4", 5-5",1-6" More
  35. Hydraulic Box and Pan Brake BB-9612H

    Hydraulic Box and Pan Brake BB-9612H

    $19,295.00
    220 Volt Three Phase Heavy Duty Hydraulic Box and Pan (Finger) Brake, 8' Length, 12 Gauge Mild Steel Capacity, Includes 22 Fingers, 6-3", 4-4", 10-5",2-6" More
  36. Hydraulic Brake Bb12014H

    Sheet Metal Brake BB-12014H

    $21,495.00
    220 Volt Three Phase Heavy Duty Hydraulic Box and Pan (Finger) Brake, 10' Length, 14 Gauge Mild Steel Capacity, Includes 26 Fingers, 6-3", 4-4",10-5", 6-6" More
  37. Hydraulic Box and Pan Brake BB-7210H

    Hydraulic Box and Pan Brake BB-7210H

    $22,495.00
    220 Volt Three Phase Heavy Duty Hydraulic Box and Pan (Finger) Brake, 6' Length, 10 Gauge Mild Steel Capacity, Includes 17 Fingers, 6-3", 3-4", 6-5",2-6" More
  38. Heavy Duty Hydraulic Box and Pan (Finger) Brake BB-9610H

    Heavy Duty Hydraulic Box and Pan (Finger) Brake BB-9610H

    $26,595.00
    220 Volt Three Phase Heavy Duty Hydraulic Box and Pan (Finger) Brake, 8' Length, 10 Gauge Mild Steel Capacity, Includes 22 Fingers, 6-3", 4-4", 10-5",2-6" More
  39. Hydraulic Brake Bb12010H

    Hydraulic Sheet Metal Brake BB-12010H

    $29,295.00
    220 Volt Three Phase Heavy Duty Hydraulic Box and Pan (Finger) Brake, 10' Length, 10 Gauge Mild Steel Capacity, Includes 26 Fingers, 6-3", 4-4",10-5", 6-6" More
  40. Hydraulic Box and Pan Brake BB-12010H-NC

    Hydraulic Box and Pan Brake BB-12010H-NC

    Regular Price: $56,895.00

    Sale Price: $51,205.50

    220 Volt Three Phase Heavy Duty Numerically Controlled Hydraulic Box and Pan (Finger) Brake, 10' Length, 10 Gauge Mild Steel Capacity, Includes 26 Fingers, 6-3", 4-4",10-5", 6-6", (Programmable Back Stop) More

Ascending | Descending