Notchers

Baileigh Industrial's metal notchers consists of a sheet metal notcher and tube and pipe notcher line. These sheet metal notchers and tube and pipe notcher machines are typically in stock for shipments within 72 hours from a confirmed order.

Our sheet metal notchers consists of four models including a hand or foot powered machine for up 16 gauge sheet metal, as well as two hydraulic sheet metal notchers with capacities up to 6 mm mild steel. The hydraulic notching machines come in variable or fixed angle versions and come standard with a patented blade gap adjustment.

Baileigh Industrials vast tube and pipe notchers consists of nine different models from fixed angle manual or powered machines to variable angle hole saw, abrasive or end mill style machines, most of which can produce offsets as well.

A Baileigh manual pipe notcher is perfect for the maintenance shop where repair or reconfiguration of hand railing might take place. These notching machines can be wall mounted for perfect notches every time. We also offer an electric die cut tube notchers that is perfect for the playground equipment manufacturers for straight and very fast notches every time.

Our hole saw tube notcher machines come in two versions. One is a simple and low cost solution that is drill press mounted and driven which can miter (non-offsets) up to 60 degrees. The next version uses a powerful industrial grade gear box and motor that drives the hole saw into the round tubing and pipe being notched. This notching machine can miter up to 75 degrees and does have off set notching capabilities.

We offer two versions of abrasive tubing notchers. A four inch wide belt version and a 6 inch wide belt version allows for complex bends up to 3-1/2 inch OD. Both notching machines operate using standard off the shelf 79 inch belts and operate using 220 V, single phase.

Finally we offer our patented end mill version, the Eccentric Cut tube and pipe notcher. This notcher machine can notch up to 3 inch OD using just one end mill that travels through a pre-programmed eccentric path. This tube notcher comes standard with a fast adjusting vise and allows for variable angle notches and offsets. This is the perfect pipe and tube notcher for structural, racing and off road chassis, steam pipe, and many more applications.

Read more about Notchers

Ascending | Descending
  1. Hole Saw Notcher TN-210H

    Hole Saw Notcher TN-210H

    $195.00

    Drill Press or Vice Mounted Hole Saw Tube Notcher has a capacity of 3/4" to 2" OD tubing at angles up to 50 degrees. Electric Drill Not Included

    More
  2. Manual Tube Notcher Tn50M

    Manual Pipe Notcher TN-50M

    $295.00
    Manually Operated Non-Mitering Pipe Notcher for 1/4", 3/8", and 1/2" Pipe. More
  3. Manual Pipe Notcher TN-125M

    Manual Pipe Notcher TN-125M

    $395.00
    Manually Operated Non-Mitering Pipe Notcher for 3/4", 1", and 1-1/4" Pipe More
  4. Manual Pipe Notcher TN-200M

    Manual Pipe Notcher TN-200M

    $495.00
    Manually Operated Non-Mitering Pipe Notcher for 1-1/2", and 2" Pipe More
  5. Sheet Metal Corner Notcher SN-F16-FN

    Sheet Metal Corner Notcher SN-F16-FN

    $595.00
    Foot Operated Corner Notcher. 16 Gauge Mild Steel Capacity. Will Notch Corners up to 3" x 3" at 90 Degrees. More
  6. Pipe Notcher Tn250

    Tube Notcher TN-250

    $595.00
    Vice Mounted Hole Saw Tube and Pipe Notcher, 2.5" OD Max Vice Opening, for use with Hand Held Drill More
  7. Manual Corner Notcher SN-F16-HN

    Manual Corner Notcher SN-F16-HN

    $695.00
    Manually Operated Corner Notcher. 16 Gauge Mild Steel Capacity. Will Notch Corners up to 6" x 6" at 90 Degrees. Maximum Force is 4 Tons. Table Size is 18" x 12" and has a 3/4" Stroke. Floor Stand is Included More
  8. Corner Notcher SN-F11-AN

    Corner Notcher SN-F11-AN

    $2,595.00
    11 Gauge Mild Steel Air Operated, Fixed Angle Sheet Metal Notcher, 5" Blade Length, 23-1/2" x 18" Working Table, 50 Strokes per Minute, 2.2 Tons of Working Pressure More
  9. Pipe Notcher TN-300

    Pipe Notcher TN-300

    $2,695.00
    110 Volt Table Top Hole Saw Tube and Pipe Notcher, Will Notch 3/4" to 3" OD From 0 to 60 Degrees. Includes 1-3/4" Hole Saw More
  10. Pipe Notcher TN-200E

    Pipe Notcher TN-200E

    $2,995.00
    220 Volt Electric Non-Mitering Pipe and Tube Notcher. Will Notch 3/4", 1", 1-1/4", 1-1/2", and 2" Schedule 40 Pipe More
  11. Abrasive Notcher TN-400

    Abrasive Notcher TN-400

    $4,795.00
    220 Volt Single Phase 3HP Abrasive Belt Notcher, 4" Belt Width, Will Notch 3/4" to 2" OD From 0 to 60 Degrees. Includes 1-1/4" Pipe Bearing Mandrel and Two Belts More
  12. Sheet Metal Corner Notcher SN-F09-MS

    Sheet Metal Corner Notcher SN-F09-MS

    $5,695.00
    9 Gauge Hydraulic Fixed Angle Sheet Metal Notcher, 3 HP Motor, 220/440V 60 Hz 3Phase, 7-3/4" Blade Length, 50 Stokes per Minute, 27" x 23.5" Working Table More
  13. Abrasive Tube Notcher TN-600

    Abrasive Tube Notcher TN-600

    $5,895.00
    220 Volt Single Phase 5HP Abrasive Belt Notcher, 6" Belt Width, Will Notch 3/4" to 3" OD From 0 to 60 Degrees. Includes 1-1/4" Pipe Bearing Mandrel and Two Belts More
  14. Snf04Ms Notcher

    Sheet Metal Notcher SN-F04-MS

    $7,295.00
    4 Gauge (6mm) Hydraulic Fixed Angle Sheet Metal Notcher, 4 HP Motor, 220/440V 60 Hz 3Phase, 8-1/2" Blade Length, 15 Stokes per Minute, 25.5" x 25.5" Working Table More
  15. Tn 800

    Tube and Pipe Notcher TN-800

    $7,995.00
    110 Volt Eccentric Cut, End Mill Tube & Pipe Notcher. Will Notch 1" To 3" OD From 0 to 60 Degrees With One Size End Mill, Can Do 1/2" OD With Optional End mill and Adapter. Patented Design More
  16. Sheet Metal Notcher SN-V04-MS

    Sheet Metal Notcher SN-V04-MS

    $17,795.00
    4 Gauge (6mm) Hydraulic Variable Angle Sheet Metal Notcher, 4 HP Motor, 220/440V 60 Hz 3Phase, 8-1/2" Blade Length, 15 Stokes per Minute, 25.5" x 25.5" Working Table More

Ascending | Descending